Bespoke Profiles and Details

Bespoke hand-finished profiles and details bring artistry and individuality to a project, elevating surfaces with refined craftsmanship. These are some examples of what we can craft in our Wiltshire studio, drawing on years of experience with natural products.

Bespoke Profiles:

Bootleg 2cm

Bootleg 2cm

A full, rounded nose above a small cove underneath, a bold traditional profile with real depth and shadow.

Bootleg 3cm

Bootleg 3cm

A full, rounded nose above a small cove underneath, a bold traditional profile with real depth and shadow.

Demi Bullnose 2cm

Demi Bullnose 2cm

A broad, shallow curve that sweeps from the top surface down to a square bottom edge, for a gentle and elongated round.

Demi Bullnose 3cm

Demi Bullnose 3cm

A broad, shallow curve that sweeps from the top surface down to a square bottom edge, for a gentle and elongated round.

Full Bullnose 2cm

Full Bullnose 2cm

Offers a refined and seamless look while enhancing safety and durability.

Full Bullnose 3cm

Full Bullnose 3cm

Offers a refined and seamless look while enhancing safety and durability.

Half Bullnose 2cm

Half Bullnose 2cm

A rounded top edge that curves down into a square base, softening the front while keeping a flat underside.

Half Bullnose 3cm

Half Bullnose 3cm

A rounded top edge that curves down into a square base, softening the front while keeping a flat underside.

Stepped Bullnose 2cm

Stepped Bullnose 2cm

A fully rounded nose set just below a small step on the top surface, giving a soft edge with a crisp shadow line.

Stepped Bullnose 3cm

Stepped Bullnose 3cm

A fully rounded nose set just below a small step on the top surface, giving a soft edge with a crisp shadow line.

Single 5x5mm Chamfer 2cm

Single 5x5mm Chamfer 2cm

A neat 5mm bevel on the top edge that removes the sharp corner while keeping a crisp, square profile.

Single 5x5mm Chamfer 3cm

Single 5x5mm Chamfer 3cm

A neat 5mm bevel on the top edge that removes the sharp corner while keeping a crisp, square profile.

Single Chamfer 2cm

Single Chamfer 2cm

A bevelled edge that enhances durability and reduces sharpness.

Single Chamfer 3cm

Single Chamfer 3cm

A bevelled edge that enhances durability and reduces sharpness.

Double 5x5mm Chamfer 2cm

Double 5x5mm Chamfer 2cm

A 5mm bevel on both the top and bottom edges, giving a balanced and crisp finish from every angle.

Double 5x5mm Chamfer 3cm

Double 5x5mm Chamfer 3cm

A 5mm bevel on both the top and bottom edges, giving a balanced and crisp finish from every angle.

Double Chamfer 2cm

Double Chamfer 2cm

A fine 3mm bevel on both the top and bottom edges, for a subtle and softened square edge.

Double Chamfer 3cm

Double Chamfer 3cm

A fine 3mm bevel on both the top and bottom edges, for a subtle and softened square edge.

Chiselled 2cm

Chiselled 2cm

A textured, hand-worked finish that creates a rugged, natural look and adds character.

Chiselled 3cm

Chiselled 3cm

A textured, hand-worked finish that creates a rugged, natural look and adds character.

Flat Polished Arris Removed 2cm

Flat Polished Arris Removed 2cm

A clean, square edge polished flat, with the sharp arris eased just enough to make it  comfortable to the touch.

Flat Polished Arris Removed 3cm

Flat Polished Arris Removed 3cm

A clean, square edge polished flat, with the sharp arris eased just enough to make it  comfortable to the touch.

Drip Groove

Drip Groove

A small channel cut into the underside of an edge, preventing staining and water damage.

LED Groove

LED Groove

A precisely cut channel cut to house LED lighting while maintaining a clean finish.

Hilton 3cm

Hilton 3cm

A small step on the top surface, a generous quarter round and a neat square fillet at the base give this edge a crisp, tailored profile

Mitred Downstand 2cm

Mitred Downstand 2cm

A seamless, precision-cut edge detail that creates the illusion of a thicker slab.

Mitred Downstand 3cm

Mitred Downstand 3cm

A seamless, precision-cut edge detail that creates the illusion of a thicker slab.

Ogee Bull 2cm

Ogee Bull 2cm

A classic ogee curve that rolls into a rounded bullnose, for a traditional and softly sculpted edge.

Ogee Bull 3cm

Ogee Bull 3cm

A classic ogee curve that rolls into a rounded bullnose, for a traditional and softly sculpted edge.

Artisans Ogee 2cm

Artisans Ogee 2cm

Our own ogee profile, with a long and gentle double curve that brings a graceful, classical line to the edge.

Artisans Ogee 3cm

Artisans Ogee 3cm

Our own ogee profile, with a long and gentle double curve that brings a graceful, classical line to the edge.

Stepped Ogee 3cm

Stepped Ogee 3cm

A flowing ogee that finishes in a small step at the base, giving a layered edge with defined shadow lines.

Artisans Stepped Ogee 2cm

Artisans Stepped Ogee 2cm

Our own version of the stepped ogee, with a fuller curve and a fine step at the base for a delicate, layered edge.

Single Pencil Round 2cm

Single Pencil Round 2cm

A softly rounded, minimal profile that provides a subtle, refined finish.

Single Pencil Round 3cm

Single Pencil Round 3cm

A softly rounded, minimal profile that provides a subtle, refined finish.

Double Pencil Round 2cm

Double Pencil Round 2cm

A square edge with a small 5mm radius on both the top and bottom arris, for a soft and understated finish.

Double Pencil Round 3cm

Double Pencil Round 3cm

A square edge with a small 5mm radius on both the top and bottom arris, for a soft and understated finish.

Stepped Roman 2cm

Stepped Roman 2cm

A shallow step on the top surface leading into a generous quarter round, finished with a softened bottom arris.

Stepped Roman 3cm

Stepped Roman 3cm

A shallow step on the top surface leading into a generous quarter round, finished with a softened bottom arris.

Thurlestone 3cm

Thurlestone 3cm

A deep rounded nose above a square step and a softly curved cove, a substantial profile that makes a statement.

Thurlestone 4cm

Thurlestone 4cm

A deep rounded nose above a square step and a softly curved cove, a substantial profile that makes a statement.

Bespoke Details:

Flooring Details

Flooring Details

Unique flooring designs and features, created from bespoke cut slabs, bring individuality and design flair to a space.

Plateau Shower Trays

Plateau Shower Trays

Seamless shower trays carved from a single stone slab. Water waste outlets can be placed anywhere on the tray, depending on your preference.

Stone Shower Grill

Stone Shower Grill

An entirely bespoke shower grill, made from a material of your choice. This can be made to match the stone used in a bespoke shower tray, and can feature a bespoke design

Linear Slot Drain

Linear Slot Drain

A sleek water drain, created using a cutout from the surrounding slab.

Need something else? Contact Us about our service or any enquiries you have.